Designation | Title | |
N/A | Application Guide for AC Adjustable Speed Drive Systems | |
N/A | A Brief Comparison of NEMA 250 and IEC 60529 | |
LSD 5 | 34 Watt Fluorescent Lamps And High Frequency Electronic Ballasts | |
N/A | A Brief Comparison of NEMA 250 and IEC 60529 | |
LSD 10 | A Guide for the Safe Use of Remote Illumination Systems Equipment, Including a Glossary of Definitions | |
LSD 31 | A Lighting Systems Division Information Bulletin: Changes to the 2005 NEC Will Impact Future Metal Halide Systems Options | |
ICS 2 Part 9 | AC Vaccum-Break Magnetic Controllers Rated 1500 Volts AC | |
ICS 61800-1 | Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements—Rating Specifications for Low Voltage Adjustable Speed D.C. Power Drive Systems | |
ICS 61800-2 | Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements--Rating Specifications for Low Voltage Adjustable Frequency A.C. Power Drive Systems | |
ICS 61800-4 | Adjustable Speed Electrical Power Drive Systems: Part 4: General Requirements--Rating Specifications for A.C. Power Drive Systems Above 1000 V A.C. and not Exceeding 35 kV | |
N/A | Alternatives to Mercury-Containing Light Sources | |
LSD 35 | ANSI Code Update to Include Letter “C” for Ceramic Metal Halide Lamps | |
RV 1 | Application and Installation Guidelines for Armored Cable and Metal-Clad Cable | |
RV 3 | Application and Installation Guidelines for Flexible and Liquidtight Flexible Metal Conduit | |
RV 2 | Application and Installation Guidelines for Nonmetallic-Sheathed Cables | |
BU 1.2 | Application Information for Busway Rated 600 Volts or Less | |
ICS 5 Part 3 Clause 9 | Application Information for Limit Switches | |
N/A | Arc-Flash Analysis—Utility System Parameters Critical for Accurate PPE | |
N/A | Avoid Arc Flash Occurrences by Following Industry Standards | |
LSD 25 | Best Practices for Metal Halide Lighting Systems, Plus Questions and Answers about Lamp Ruptures in Metal Halide Lighting Systems | |
LSD 27 | Best Practices for Operating Fluorescent Lighting Systems | |
N/A | Cable Tray Span Specification | |
LSD 8 | Compact Fluorescent Lamps In Residences – Power Quality Implications | |
LSD 9 | Compatibility of Add-on Tube Guards with T-8 Fluorescent Lamps Operating on High Frequency Electronic Ballasts | |
LSD 18 | Compatibility of Fluorescent Lamps and Electronic Ballasts in Frequently Switched Applications | |
N/A | Conduit-In-Casing Construction | |
LSD 17 | Consumer Guide for Four-Foot Fluorescent Bulbs | |
LSD 22 | Demand Reduction and Energy Savings Using Occupancy Sensors | |
N/A | Electrical Installation Requirements: A Global Perspective | |
KS 1 | Enclosed and Miscellaneous Distribution Equipment Switches (600 Volts Maximum) | |
LSD 21 | End-of-life Operation of Small Diameter (5/8 Inch Diameter or Less) Pin-based Fluorescent Lamps | |
MG 10 | Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors | |
MG 11 | Energy Management Guide for Selection and Use of Single Phase Motors | |
N/A | Engineering Series Ratings: Is It Practical? | |
LSD 13 | Exit Sign Brightness for Visibility & Safety | |
N/A | Expansion Joints for PVC Rigid Nonmetallic Conduit | |
Bul. No. 84 | FCC Regulations Applicable to NEMA Products | |
FG 1 | Fiberglass Cable Tray Systems | |
N/A | Fire and Carbon Monoxide Safety Recommendations | |
N/A | Fluorescent Lamps and the Environment | |
BU 1.1 | General Instructions for Proper Handling, Installation, Operation, and Maintenance of Busway Rated 600 Volts or Less | |
PB 1.2 | General Instructions for Proper Installation, Operation, and Maintenance of Panelboards Rated 600 Volts or Less | |
LSD 4 | Glossary of Terms Pertaining To Remote Illumination Systems | |
N/A | Green Marking of Lamps | |
N/A | Guide for Proper Use of System Smoke Detectors | |
N/A | Guide to Preparing a Design Proposal for Paralleling Customer Generation with an Electric Utility | |
N/A | Guidelines for Handling Water Damaged Electrical Equipment | |
AB 4 | Guidelines for Inspection and Preventive Maintenance of Molded Case Circuit Breakers Used in Commercial and Industrial Applications | |
Bul. No. 79 | Guidelines for Metric Conversion of NEMA Standards | |
LSD 14 | Guidelines on the Application of Dimming to High Intensity Discharge Lamps | |
N/A | Hazards of Working Electrical Equipment Hot | |
N/A | Impact of Mercury Legislation on the Lighting Industry | |
LSD 29 | Incompatibility of T8 Ballasts (RS, PS, Dimming) and “Shunted” Bi-pin Lampholders | |
ICS 10 | Industrial Control and Systems Part 1: Electromechanical AC Transfer Switch Equipment | |
ICS 10 | Industrial Control and Systems: AC Transfer Equipment — Part 2: Static AC Transfer Equipment | |
ICS 5 Annex E | Industrial Control and Systems: Additional Requirements for Proximity Switches Suitable for Use in Strong Magnetic Fields | |
ICS 7 | Industrial Control and Systems: Adjustable-Speed Drives | |
ICS 14 | Industrial Control and Systems: Application Guide for Electric Fire Pump Controllers | |
ICS 5 | Industrial Control and Systems: Control Circuit and Pilot Devices | |
ICS 2 | Industrial Control and Systems: Controllers, Contactors, and Overload Relays Rated 600 Volts | |
ICS 2 Part 8 | Industrial Control and Systems: Controllers, Contactors, and Overload Relays, Rated Not More Than 2000 Volts AC or 750 Volts DC: Part 8 - Disconnect Devices for Use in Industrial Control Equipment | |
ICS 19 | Industrial Control and Systems: Diagrams, Device Designations, and Symbols | |
ICS 6 | Industrial Control and Systems: Enclosures | |
ICS 1 | Industrial Control and Systems: General Requirements | |
ICS 3.1 | Industrial Control and Systems: Handling, Storage, and Installation Guide for AC General-Purpose Medium Voltage Contactors and Class E Controllers, 50 and 60 Hertz | |
ICS 5 Annex F | Industrial Control and Systems: High Pressure Power Wash Test Procedure for Self-Contained Control-Circuit Devices | |
ICS 15 | Industrial Control and Systems: Instructions for the Handling, Installation, Operation, and Maintenance of Electric Fire Pump Controllers Rated Not More than 600V | |
ICS 2.3 | Industrial Control and Systems: Instructions for the Handling, Installation, Operation, and Maintenance of Motor Control Centers Rated Not More than 600 Volts | |
ICS 3 | Industrial Control and Systems: Medium Voltage Controllers Rated 2001 to 7200 Volts AC | |
ICS 16 | Industrial Control and Systems: Motion/Position Control Motors, Controls, and Feedback Devices | |
ICS 18 | Industrial Control and Systems: Motor Control Centers | |
ICS 1.3 | Industrial Control and Systems: Preventive Maintenance of Industrial Control and Systems Equipment | |
ICS 12.1 | Industrial Control and Systems: Profiles of Networked Industrial Devices—Part 1: General Rules | |
ICS 1.1 | Industrial Control and Systems: Safety Guidelines for the Application, Installation, and Maintenance of Solid State Controls | |
ICS 4 | Industrial Control and Systems: Terminal Blocks | |
ICS 5 Annex B | Industrial Control and Systems: Typical Proximity Switch Specifications | |
MG 1 Condensed | Information Guide for General Purpose Industrial AC Small and Medium Squirrel-Cage Induction Motor Standards | |
BU 1.1 (Spanish Version) | Instrucciones Generales Para el Manejo, Instalacion, Operacion y Mantenimiento de Electroductos Hasta 600 Volts Nominales o Menos | |
PB 1.1 (Spanish Version) | Instrucciones Generales Para la Instalacion, Operacion y El Mantenimiento Correcto de Tableros de Alumbrado y Control Hasta 600 Volts Nominales o Menos | |
LSD 3 | Interaction of Infrared Controls and Electronic Compact Fluorescent Lamps | |
LSD 6 | Interaction of Infrared Controls and Fluorescent Lamp/Ballast Systems in Education Facilities | |
Bul. No 71 | Knockout Diameters and Fitting Dimensions to Assure Mechanical and Electrical Continuity | |
Bul. No. 93 | Length Limitations for FMC and LFMC. | |
N/A | Manufacturer Take Back of Lamps | |
LSD 24 | Marking of Luminaire Codes on Metal Halide Lamps | |
VE 2 | Metal Cable Tray Installation Guidelines | |
AB 3 | Molded Case Circuit Breakers and their Application | |
N/A | Molded-Case Circuit Breakers Reduce Arc Flash Hazard Impact | |
Bul. No. 55 | Multiple Knockouts | |
LSD 1 | NEMA - Tungsten-Halogen Lamps (Bulbs): Ultraviolet, Rupture, and High Temperature Risks | |
LSD 2B | NEMA - Wiring Requirements for 2G11 Based T-5 Fluorescent Twin Lamps With Instant-Start Ballasts | |
N/A | NEMA Analysis of the Energy Policy Act of 1992: The Scope of Electric Motors Subject to Efficiency Standards on October 24, 1997 | |
ICS 2.4 | NEMA and IEC Devices for Motor Service—A Guide for Understanding the Differences | |
N/A | NEMA Enclosure Types | |
N/A | NEMA Guide to Lighting Controls | |
Bul. No. 89 | NEMA Policy on Adoption of the National Electrical Code | |
N/A | NEMA Position on Compatibility between Smoke Alarms and AFCIs | |
Bul. No. 91 | NEMA Termination of Bonding Strip on Type AC Cable | |
PB 1 | Panelboards | |
Bul. No. 88 | Phantom Voltages | |
N/A | Pin Based Compact Fluorescent Lamps | |
N/A | Quality Informational Guide for Automatic Fire Detection and Alarm Systems | |
LSD 15 | Radioactive Substances In Compact Fluorescent Lamps | |
N/A | Recommendations for the Care and Maintenance of High Intensity Metal Halide and Mercury Lighting in Schools | |
LSD 23 | Recommended Practice — Lamp Seasoning for Fluorescent Dimming Systems | |
LSD 34 | Recommended Practices for T8 Rapid Start Fluorescent Lamp Dimming (17W, 25W, 32W, and 40W Lamps) | |
DC 12 | Residential Controls: Hot Water Immersion Controls | |
DC 13 | Residential Controls: Line Voltage Integrally Mounted Thermostats for Electric Heaters | |
DC 20 | Residential Controls—Class 2 Transformers | |
DC 3 | Residential Controls—Electrical Wall-Mounted Room Thermostats | |
DC 5 | Residential Controls—Surface-Type Controls for Electric Storage Water Heaters | |
DC 10 | Residential Controls—Temperature Limit Controls for Electric Baseboard Heaters | |
N/A | Safety Guide for Use of Extension Cords | |
ICS 7.1 | Safety Standards for Construction and Guide for Selection, Installation, and Operation of Adjustable-Speed Drive Systems | |
OS 3 | Selection and Installation Guidelines for Electrical Outlet Boxes | |
FB 2.20 | Selection and Installation Guidelines For Fittings for Use With Flexible Electrical Conduit and Cable | |
FB 2.10 | Selection and Installation Guidelines for Fittings for Use with Non-flexible Electrical Metal Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing) | |
N/A | Solvent-Cementing Joints for PVC Rigid Nonmetallic Conduit, Duct, and Fittings | |
N/A | The Labeling of Mercury Containing Lamps | |
N/A | The Strengths of an Effective Electrical Safety System | |
N/A | Type 2 Motor Starter Protection Guide | |
LSD 7 | Ultraviolet Radiation From Fluorescent Lamps | |
Bul. No. 90 | Use of Anti-Short Bushings for Terminating Type MC Cables | |
Bul. No. 92 | Use of Type NM-B Cable for Wiring of Residential Lighting Fixtures | |
N/A | User Guide to Product Specifications for Electrical Building Wire and Cable | |
5RN 2189 | User Guide to Product Specifications for Metal Electrical Conduit and Tubing | |
Bul. No. 78 | User Input to NEMA Standards (Guidelines for NEMA Subdivisions) | |
LSD 11 | White Paper on Outdoor Lighting Issues | |
LSD 2 | Wiring Requirements for T-8 Lamps with Instant-Start Ballasts | |
| | |
| | |
